You are watching: 2002 ford explorer window off track
examine the wiring and also connectors for vehicle drivers door switch !Removal and Installation (rear window)Remove the rear door an installed speaker.Remove the within glass weatherstrip.Remove the watershield.Connect the home window control switch.Lower the behind glass to access the regulator to glass clamp organize down screw in ~ the bottom of the door.NOTE:Some vehicles might use rivets to attach the glass to the regulator.Remove the bolt that attaches the glass to the window regulator. Remove the top run channel indigenous the framework of the door glass opening.Remove the applique top top the rear door.Remove the screws.NOTE:Slide the glass v the outboard next of the rear door (24630).Remove the rear door window glass (25712). To install, turning back the remove procedure.
would a repair hands-on tell me just how to check the wiring & connectors on the door switch? as for the instructions on the rear window, what am i replacing? The method I read it, I"m replacing the window and naught else. Also there is a sentence throughout removal that claims to "connect the door switch"; must that to speak disconnect instead? Sorry for the follow-up questions. Is the repair manual easily accessible on this site?
See more: Does Nintendo Ds Lite Have Wifi ? Can You Connect A Ds Lite To Wifi
Yes, you have the right to purchase a subscription to a repair hand-operated using the connect in the blue dashboard at the left of the screen.click you right mouse switch on this wiring diagram to conserve it to your computer.
Front Door window Regulator and MotorRemoval and InstallationRaise the prior door window glass come the half-open position.Remove the former door trim panel. Eliminate the inside glass weatherstrip.Remove the watershield.Disconnect the lock rod in ~ the latch assembly.NOTE:Some vehicles might use rivets to attach the glass come the regulator.Remove the bolts that affix the glass to the regulator. NOTE:The home window must be in the complete up place for this step.Support the window glass. Disconnect the window motor electrical connector.Disconnect the regulator and also motor assembly from the door frame.Remove the regulator and motor assembly v the door opening.To install, turning back the removal procedure.let me understand if you require any an ext information.