Mark cycle Lanes through this Bike lane Pavement marking Symbol, and assist keep roadways safer for cyclists. Procedures 6" x 2".

You are watching: Lanes marked with a diamond symbol

Our pavement noting symbols are available in three grades: Removable, durable Grade, and Extended Life.

Pavement noting symbols save traffic relocating smoothly and also safety by clearly communicating traffic flow patterns. These sturdy pre-cut markings install quickly and also easily through no dry time or cure time necessary. Featuring a press sensitive adhesive, these rubber based markings will keep a secure shortcut in any type of climate.

Installation Recommendations:

Air and surface temperature have to be 50 degrees F (10 levels C). SURFACE need to BE fully DRY. Surface should be clean and free of any type of contaminants which may include however not minimal to oils, grease, sand, dirt, dust, loose aggregate, curing compound, mud, soil and salt. If concrete is less than 45 days old, or has actually never been opened up to traffic, the curing compound should be totally removed by push washing, sandblasting, or grinding the surface. Perform not use product straight on seams, joints, deteriorating markings or substrates. Tapes applied directly end seams and joints have to be cut through 1" on both sides of the joints or seams to protect against de-bonding of the tape. Constantly USE target SPLICES. Steady tamp the product in the exact same direction together it was applied on the early pass. A minimum of 3 passes total. Usage a tamper device with a minimum 200 lb. (90kg) load and a tamping surface a minimum 2" wider than the broad of tape gift applied. Never ever twist the tampering machine during tamping. Repeat tamping as necessary to insure ice has totally conformed come the surface. Every users should test a little piece that product because that satisfactory adhesion before installing large portions.
Mark bicycle Lanes v this Bike lane Pavement marking Symbol, and help keep roads safer for cyclists. Actions 6' x 2'.

Our pavement marking symbols are easily accessible in three grades: Removable, durable Grade, and also Extended Life.

See more: Where Does Romeo Get Banished To Banish Romeo From Verona? Romeo And Juliet: Act 3 Scene 3

Pavement marking symbols save traffic relocating smoothly and safety by clearly communicating traffic circulation patterns. These resilient pre-cut markings download quickly and also easily through no dry time or cure time necessary. Featuring a pressure sensitive adhesive, this rubber based markings will keep a secure bond in any kind of climate.

Installation Recommendations:

Air and surface temperature need to be 50 levels F (10 levels C). SURFACE have to BE completely DRY. Surface must be clean and free of any contaminants which might include yet not restricted to oils, grease, sand, dirt, dust, loosened aggregate, curing compound, mud, soil and also salt. If concrete is much less than 45 days old, or has never been opened to traffic, the curing compound should be totally removed by pressure washing, sandblasting, or grinding the surface. Execute not apply product directly on seams, joints, deteriorating markings or substrates. Tapes applied directly over seams and also joints should be cut through 1" on both political parties of the joints or seams to protect against de-bonding that the tape. Always USE target SPLICES. Firmly tamp the product in the very same direction as it was used on the initial pass. A minimum of 3 passes total. Use a tamper machine with a minimum 200 lb. (90kg) load and a tamping surface a minimum 2" wider than the broad of tape being applied. Never ever twist the tampering device during tamping. Repeat tamping as important to insure ice has fully conformed come the surface. All users need to test a tiny piece the product for satisfactory adhesion prior to installing huge portions. ">